Have you successfully shared?

25 Gallon Bench Top Sandblasts Cabinet Air Sand Blaster Sand Blast SandBlast New

$105.95 $132.99 Item No: 04189325
Free Shipping Shipping up to 2-5 days
Out of stock
This item is in transit.


  • Brand New And High Quality
  • Working With Smaller Abrasive Materials For Cleaning, Polishing And Finishing
  • 17” Gauntlet Gloves Allow Access To The Inside Of The Cabinet For Operating
  • Built-In Low Voltage 15 VDC Light Provides Visibility For Intricate Work
  • See More


  • Material: Cold-Rolled Sheet
  • Overall Dimension: 23”×20”×19”(L×W×H)
  • Operation Space: 22”×18”×11”(L×W×H)
  • Operate Air: 80psi / 5 CFM
  • Package Size:26”×22”×21”(L×W×H)
  • Weight:37 Lbs
  • Package Include:
  • 1×25 Gallon Sandblast Cabinet
  • 4×Assorted Ceramic Nozzles
  • 1×Dust Collector Port
  • 1×Blasting Gun
  • 1×Owner Manual
  • Caution:
  • Please Read The Owner Manual Thoroughly Before Using The Unit.
  • Please Retain This Manual For Future Reference.
  • See More
    • D
      David M.
      Yes (14)
      Need air larger compressor
      Handy for small shop
    • P
      Yes (12)
      Five Stars
      very happy !
    • R
      Yes (11)
      It's a good start, needs mods to make usable for any amount of time
      This blast cab is only a starting point. It needs several modifications to make it usable on a regular basis. First off, when you are using it, you are basically pressurizing it with compressed air- any little gap anywhere lets out all the dust. The dust needs to be dealt with also.The first thing I did was to seal up all the seams in the metal box before adding the media. I also added a small strip of foam around the opening at the window, on the metal box side.I made a dust collector similar to some you can find in online videos, basically a small shop vac with a bucket of water in between. I modified the small vent opening in the rear of the cab to accept the hose.You will also need to add an air regulator, it seems like less air is better, just use enough pressure to make it work.This seems to make it work well, I just need a way to sift out the larger chunks of rust that I'm blasting off, they clog the gun.
    • N
      Nancy Scott
      Yes (5)
      Easy exchange of damaged device. Quick response even though it was a holiday.
      Received the cabinet with a cracked top. Immediately had a return on the way. Easy peezy exchange. Was a bit of a challenge with the instructions as to put it together, can't wait to use it.At first, gave it a 1 star waiting to see how the exchange would go. EXCELLENT exchange.
    • Yes (30)
      Product is good, as for the leaks all it needs is ...
      Product is good, as for the leaks all it needs is better washer for the air lines, as for the hose for both pickup and feeding they should be at least 2 1/2 feet long for better control of both the feeding if the sand and the line for air,
    • L
      Lakewood Projects
      Yes (23)
      Works great. Seals leak so it takes a little bit ...
      Works great. Seals leak so it takes a little bit of bending of the top but it works great. The suction tube could've been improved on how it's installed.
    • D
      David Allen
      Yes (40)
      Great basic cabinet for the home shop.
      I've had my raceway bench top cabinet now for at least 8 years or more. I cannot believe the reviews on here. This is a basic unit, if you want something built like a Mack truck, spend the $900 to get one. If it comes in dented, return it, its not the manufacturers fault the shipper destroyed it in transit. Also, don't complain about dust if your using the most dust prone media, sand. Glass beads are the cleanest, leave a nicer finish, and get into areas and details better.My cabinet arrived in one piece, although the top plexiglas was warped which made it difficult to get a good seal. The cabinet comes assembled, just build a suitable bench so your comfortable standing in front of it, and place it on top. Before loading media for the first time, run a thin bead of clear silicone caulk along all of the inner seams and leave dry for a day or two. My light was poor working and burned out after the first use. I purchased an under the cabinet light strip you can get for the kitchen. They are sealed in a tube and can be attached easily to the upper rear wall of the cabinet. I use 40 pounds of 80 grit glass bead in my cabinet, and its just the right amount. There is a convenient plug on the bottom to assist in removing the old media when you need to change it. The unit came with a basic gun and hoses made of garden hose pieces which were a bit stiff. I still have those hoses after all this time, but I'm getting ready to swap them out as they are getting stiffer with age and moving the gun around is getting to be more of a chore. All blasting cabinets leak abrasive except the higher end models. Mine usually leaks at the corners of the lid. No matter what, grab a box of medical masks at the drug store, and toss one on to be safe. In the 8 years or so I've had my cabinet I've replaced the foam seal around the top glass, once. Just go to a big box hardware store and buy Frost King adhesive foam and stick it on. My lid split after I slammed it once a few months ago. I new piece of plexiglas is not too expensive. Just be sure to buy a plexiglas bit to drill the hinge holes. The stick on sheets for the under side of the lid are useless. They get frosted over quickly and then want to peel off. The gloves I've replaced twice now. I've restored hundreds of old toys using my cabinet and have done smaller car parts and other items that would normally be tossed out. I cannot complain at all about this cabinet. For $99 and free shipping, it has done right by me for a basic cabinet. To use it, you will need to buy a decent size compressor and a blasting medium. It will handle everything from soda ash to iron oxide without any problems. The gun connects to a nozzle on the side of the cabinet on the inside. You will need to connect your compressor to the attachment on the outside of the cabinet. I use a small Sears carpenters 5 gallon pancake compressor, and it does a decent job although I do have to wait a bit every minute or so for it to catch up. Using it with my 150 gallon De Walt I can go for a lot longer without having to wait for a recharge.
    • D
      Dean G. Hedge
      Yes (46)
      Five Stars
      If you read the instructions product is perfect
    • W
      Wanda L Rasa
      Yes (24)
      He needed something to sandblast small parts for an old truck he's restoring and this works perfect! Very good quality especiall
      This was a Christmas present for my husband and he loves it! He needed something to sandblast small parts for an old truck he's restoringand this works perfect! Very good quality especially for the price. Thanks!
    • E
      Ellis C Grimes
      Yes (18)
      We bought this as a Christmas present for my son ...
      We bought this as a Christmas present for my son and he absolutely loves it and has used it. Works well.
    More Reviews
    Shipping Return


    FREE Shipping

    Shipping up to 2-5 days.

    Orders normally are shipped out via UPS, USPS and trucks.

    No delivery to Alaska, Guam, Hawaii, Puerto Rico.

    No delivery to FPO, APO, and PO Box addresses.

    Note: 8.25% sales tax will be applied for orders shipped to CA. No sales Tax for other states.

    See more details >>

    Standard Return Policy:

    A: Quality or other related returns: We do our best to ensure that the products we deliver to you are of a high quality, and in good working order and without defects. If you have received a product which turns out to be defective or otherwise of poor quality, please notify us as soon as reasonably possible, we will exert great effort to cope with the issue according to the status of the item with partial refund, full refund or return for replacement.

    B: Non-quality related returns: We are not responsible for any return shipping costs in case that you are not completely satisfied with your purchase nor accidentally placed the wrong order after receiving the item.

    See more details >>

    Please note that order cancellation after shipment will be liable to the recall cost charged by UPS, which is $15.90. Contact us immediately if you decide to cancel your order.

    Large Order Deals

    Thank you for your interest doing business with us!

    If you would like to get a better offer for your large orders, you could fill in the blanks below with required info. We need the following information about your order: your personal email address, the SKU or the link of the item that you want to order, item's quantity (The minimum quantity should be 30 pieces), the shipping state and zip code. We will contact you with a special offer ASAP after we receive your inquiry.